Create a Call Control Recorder Group
Create a Call Control Recorder Group to identify gateway IP addresses and Recorders that are associated with the recording of IP calls within the group.
Procedure
-
On the Analyzer server, in Recorder Manager, click General Setup > Call Control. The Call Control window appears.
-
Click Create.
-
Complete the Recorder Group fields as follows:
Item
Description
Name
Type a name for the Recorder group.
Description
Type a description (optional) of the Recorder group.
Gateway IPs
Click Add, and type the IP address of the Gateway whose SCCP, SIP, or Avaya (H.323) traffic you want forwarded to the remote Recorder, as in the following example: 10.3.4.5. Click Add after each entry to create a new line that will accept a new IP address. The Gateway is the endpoint that the Recorder Group will see RTP traffic for.
To delete Gateway information, select it, then click Delete.
Recorders
Click Add, and type the IP address of the Recorder that is to receive that Gateway’s SCCP/SIP/Avaya (H.323) traffic, along with the port number, as in the following example: 10.3.5.62:3030. Click Add after each entry to create a new line that will accept new information.
To delete Recorder information, select it, then click Delete.
-
Click Save
The Recorder group is added to the Group Name pane on the left.