Aastra TSAPI

Use this adapter to integrate with the Mitel MiVoice MX-ONE, in both Interception and SIP Delivery environments.

Procedure 

1. In Recorder Manager, click General Setup > Integration Adapters > Settings.

2. Click Create, then select Aastra TSAPI Adapter.

3. Specify settings for this adapter in the right-hand pane, referring to the following table (all fields are required unless otherwise indicated):

   Field	Description
   Adapter Name	Type a unique name for this adapter. Do not use any special characters or characters that truncate xml. This field is not case sensitive.
   Description	Type a description of the adapter (optional).
   Adapter Type	A read-only field that lists the adapter selected above.
   Startup Type	Select a startup type: Automatic, Manual, or Disabled.
   DataSource	Select the Aastra MX-ONE data source Third-party systems that provide data to the system, including employee and device states, and data change events. Typical data sources are phone switches, PBXs, or LANs. that you created in Enterprise Manager.
   Aastra TSAPI Service Id	This is an internal identifier by which the switch is known to the TSAPI server. The Aastra TSAPI Service Id takes the following format: host=10.67.36.30; tcp/ip=2562;
   Backup Service Id	A backup Id for the above.
   Login Name	Specify the login name used to access the TSAPI server.
   Login Password	Click the button beside the Password field to type a password used to access the TSAPI server.

4. Under Advanced Settings, use the Key and Value fields to enter any proprietary settings for the Recorder Integration Service to use for this specific adapter.

5. Click Save. The adapter appears in the left-hand pane.

6. Select the adapter in the left-hand pane and click the Start button to start the adapter.