Huawei Adapter

This procedure describes how to create an adapter for a Huawei integration.

Procedure 

  1. Click General Setup > Integration Adapters > Settings.

  2. Click Create, then select Huawei Adapter.

  3. Specify settings for this adapter in the right-hand pane, referring to the following table (all fields are required unless otherwise indicated):

    Field

    Description

    Server Hostname

    Type the hostname of the Huawei server. The default is server.

    Port

    Type the port number for the server specified above. The default is 3001.

    Use Backup Server

    Select this check box to enable a backup server.

    Backup Server Hostname

    If you enable the Use Backup Server option, type the name of the backup server here. The default is server2.

    Backup Port

    Type the port number for the backup server specified above. The default is 3002.

  4. Click Save.

  5. Select the adapter in the left-hand pane and click the Start button to start the adapter.

Related topics 

Supported Integration Service CTI adapters